Featured Products
6 Item(s)
Grid List
-
Chrome Billet Halfmoon Floorboards Pegs for Harley-Davidson FLT FLST 1988 to 2015 dressers and touring models
$249.00Set of 2 Large Chrome Billet Floorboards
Beautifully Chrome half-moon perforated floorboards that fit FLT and FLST Harley Bagger , Dresser models.
Best quality floorboards we have to offer. Billet aluminum construction with flawless powder coating.
Best quality and coolest floorboards on the harley marketDriver
13" long
4-1/4" wide
1/2' thickWill fit Harley-Davidson FLT models from 1988-2015
FLST 1986-2015
and any custom application.
Learn More
-
5" Stretched Gas Tank #28 for Harley Chopper 4.5 gallon
$149.995" Stretched Bad Ass Chopper Gas Tank
4.5 gallonThis tank is designed by Demon's Cycle and will be available exclusively from us.This is not your average custom tank. No shortcuts were taken in the design of this beauty. It is built with only the best quality in mind and will satisfy even the most demanding custom builder.Featuring:5" StretchCurved bottom lines to compliment the curvature of the engine rocker boxes16 gauge steelPointy tip is built in to complete the shape of the tank perfectly and save you hours of welding and grinding2 crossover holes, single petcock holeHighest quality, all metal flush pop-up gas cap (included)Extra deep 7.75" tunnel for various mounting positionsThis is tank is manufactured out of high quality steel and is much better than leaky knock-off tanks.Custom Chopper Tank
for Custom Harley-Davidson Choppers and any Custom application25" tunnel
Tunnel width 2-1/2"
Overall length 25"Width 15.5"Height 9.5"Tunnel Depth 7-3/4"
Mounting holes distances 10-1/4", 4-1/4"
Tank on a chopper built by Demon's Cycle
Learn More -
Avon 250/40 R18 AV72 Cobra Rear Tire for Custom Harley-Davidson
$239.99Avon 'Cobra'
SuperWide 250-Series Rear Tire
Avon has created the widest rear motorcycle tire available on the market.
Super low profile side-walls let you show off your custom wheels.
This radial tire has a smooth contour and aggressive Cobra tread pattern for excellent handling.Densely wrapped belt in center for stability, wear and mileage;
less dense on shoulders for huge, compliant contact patchConsistent handling and stability for the full life of the tire
Snakeskin Sidewall Treatment Compliments Cobra logo and tread design
Tread gives optimal water dispersal
Design reduces flex for improved grip and stability
For use with custom frames, fenders and 18" x 8.50"- wide wheels.
250/40 R x 18" Blackwall
Learn More
-
18" Rise Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Motorcycles
$449.99Chrome 18" Rise 'El Diablo' Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)
Hydraulic Hand controls also AvailableThis is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Chrome 'El Diablo' Apehangers
18" Rise 1-1/4" Handlebars
Show chromed!
18" rise. 8" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
.jpg)
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Wire Plus Mid-Frame Wire Harness with Module for Auto Cancel Turn Signals 1996-Up Harley-Davidson
$99.99Wire Plus
Mid-Frame Harness
for Harley-DavidsonCustom wire harness for bikes with auto cancel turn signals.Includes all necessary connectors and auto cancel module.A perfect custom fit wiring system. Find satisfaction with this 105 Series mid-frame mounted system, featuring a central power control module.
- Solid-state breakers that never need replacing and a replaceable starter relay
- Water-resistant system
- Harness is pre-assembled with all terminals
- Sockets and plugs installed requiring a minimal amount of assembly time
- Provides full handlebar control functions including standard turn signals
- Includes all necessary connectors, sockets, pins, conduit and shrink tube
For models with 1996-up controls
Custom Chrome retail price: $429.99
All wiring instructions and diagrams are included.Made in USA
Learn More
-
11.8" Super Spoke Front Rear Brake Rotors for Harley-Davidson Touring 2008-Up
$119.99SUPER SPOKES
Brake Rotors KitThese polished stainless steel drilled rotors look great with just about any style of rims, especially spoked wheels.
Rust resistant. Surface induction hardened with a 12-14% chrome content for longer life.
Heat treated to relieve stress.to fit Harley-Davidson Touring models from 2008-09 FLHT, FLHTC, FLHTU, FLHTX, FLHTR
Use stock mounting hardware.Rotors:
1 11.8" Front
1 11.8" Rear
Learn More
6 Item(s)
Grid List
Shopping Options
- Brands
-
- Demon's Cycle (5)
- Avon (1)
- Manufacturer
-
- Demon's Cycle (3)
- DNA (1)
- AVON (1)
- Wire Plus (1)
- Price
-
- $0.00 - $99.99 (1)
- $100.00 - $199.99 (2)
- $200.00 - $299.99 (2)
- $400.00 and above (1)
You have no items to compare.
You have no items in your shopping cart.
Call us: (954) 943-0000
Mon-Fri 9:00 am - 6:00 pm EST
Sat - 9:00 am - 2:00 pm EST
