Black Parts
Harley-Davidson Nightster and Night Train are famous for the all black stealth look. We offer a choice of custom motorcycle parts in black for custom Harleys, choppers and bobber projects. Our handlebars, Harley wheels, engines, transmissions, starters, billet air cleaners and side mount license plates come in variety of black finishes: flat black, gloss, wrinkle, powdercoated and anodized. Some of the Harley forward controls, grips and headlights are manufactured exclusively for Demon's Cycle and available only from us.
-
Black 1-1/4" Handlebars T-Bars 10" Rise with Hand Controls + Switches for Harley-Davidson
$299.99BLACK 10" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 10" Rise 1-1/4" T-Bars
Powder coated black!
10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More
-
Custom Black Billet Forward Controls with Chrome Footpegs for Harley Big Twins 2000-Up DEEP CUT
$249.00BLACK BILLET "DEEP CUT"
FORWARD CONTROL KITWITH CHROME FOOTPEGS AND SHIFTERSBlack billet forward control kit with fold-up vented chrome pegs and 3/4" bore master cylinder.
These are bushing style forward controls
work better and smoother than bearing style controlsRear brake and shifter For Harley-Davidson Big Twin Softail models 2000-Up (except Dyna) and Custom Choppers.Compare our price and style to tribal forward controls by Eddie Trotta, Legends, Accutronix.
Learn More -
6-Speed Black and Chrome Transmission for Harley-Davidson Softail
$695.00'6-Speed LSD Overdrive'
Complete Black Wrinkle and Chrome Transmission with Chrome CoversLatest 2014 year model.
We don't offer 2003-05 models as "new", like our competitors.Case is cast from 356-T6 aluminum
Chrome plated Forged Billet Trap Door
Built with German Made Split Main and Counter Shaft Bearings
NOT CHINESEAt last there's a solution that reduces vibration and improves acceleration. When the bike hits freeway speeds, simply shift into 6th gear and lower the cruising RPM. Freeway cruising becomes more enjoyable with reduced vibration, increased gas mileage while keeping the engine in the heart of its torque band. This 6-speed transmission is complete, and ready-to-install
Close ratio Tranny assembly.
1st gear -2.94
2nd gear -2.21
3rd gear -1.6
4th gear -1.23
5th gear -1.00
6th gear -0.86
All owes to get about 5 mph more in the 1st gear, and around 450 rpms lower at the highway speeds.
Black Wrinkle Finish Aluminum with Chrome
Fits Harley-Davidson Softail frames
and custom application.You can easily use this transmission for 2000-Up Twin Cam 6-speed conversion. Transmission body is different but the internal structure (gears) are the same, so you can swap the 6-speed gears with your original 5 speed gears and end up with 6-speed transmission on your bike and a 5-speed transmission that you can sell and cover your expenses making the whole swap virtually free.So all you do is swap gears and resell the new case with used 5 speed gears.
Learn More
-
Black Wideglide Billet Front End 4" Over Stock 3 Degree Raked Length Dual or Single Disc for Harley Davidson 2000-Up Models
$499.99GLOSS BLACK POWDERCOATED
COMPLETE CUSTOM-STYLE FRONT END for 2000-Up Harley-Davidson
4" OVER STOCK LENGTH
3 RAKEHighest quality custom front end. If you want your bike to be the best of the best - this is the one you need.
Uncompromising show look. None better.37" Overall length.
41mm forks.
Dual disc application can be used for Single disc application (caliper mount for 2000-Up Harley models).
Comes with axle.Black billet triple trees with 3 rake.
Will fit any Harley-Davidson model with 1" stem
and any custom application (caliper bracket for 2000-Up models).
Here is a comparison of caliper mount brackets for 1986-99 front ends (on the left) and new 2000-Up bracket (on the right). If you have 2000-Up brakes you no longer need an adapter!
src="http://demonscy.ipower.com/i_pics/front_end_custom_billet_black_harley_wideglide_hot_girl_chopper.jpg">
Learn More -
Custom Black Billet Forward Controls for Harley Big Twins 2000-Up CONTOUR
$249.00BLACK BILLET "CONTOUR"
FORWARD CONTROL KITWITH CHROME FOOTPEGS AND SHIFTERS3/4" Bore billet forward control kit with fold-up chrome barrel pegs and Master cylinder.
These are bushing style forward controls
work better and smoother than bearing style controlsRear brake and shifter For Harley-Davidson Big Twin Softail models 2000-Up (except Dyna)
and Custom Choppers.Compare our price and style to tribal forward controls by Eddie Trotta, Legends, Accutronix.
Learn More
-
1-1/4" Black Handlebars "T-Bars" 4.5" Rise with Hand Controls + Switches for Harley-Davidson
$299.99Low BLACK 4.5" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Handlebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 4.5" Rise 1-1/4" T-Bars
Black powder coated!
4.5" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are drilled for late control wiring.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More -
El Diablo Black 18" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for Harley Motorcycles
$199.99"EL DIABLO" BLACK UNIVERSAL APEHANGERS
18" Rise 1-1/4" Handlebars
To fit Harley-Davidson FLST, FXST and any custom application.Powder coated black!
18" rise. 8" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.Flat Black
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Engine Case for Harley Evo Motors 92-Up Aluminum Black
$749.99ULTIMA ENGINE CASE
Engine case is the foundation of your complete engine project and we offer the finest available in the industry. Improved appearance and design features in almost every area of this casting along with its exceptional price makes this a must when replacing worn out or weak stock casting. This case is produced from prime C335-T6 which is commonly used military alloy and known for its stability over multiple heat cycles. Machining is done on state of the art CNC machining centers using hydraulic fixturing for repeatability with strict QS and ISO quality standards enforced. This along with other solid quality features like cast-in high carbon steel inserts, counter bored allen case bolts, Large 1/4" NPT drain plug, clearance for up to 5" strokes and a high volume ported breather make this a professional engine builders choice for your next high performance engine.
Case kit comes with the main bearings, cam bearing, chromoly cylinder studs installed and the pinion race sized to 1.751". Also included are: main seal, main seal spacer, top end feed screen spring, chrome timing hole plug, stainless steel case bolts and the oil pressure gauge.
Fits Harley-Davidson 3.625" bore Evo engines 1992 UpComes with VIN and MSOBLACK finish.Made in USA
Learn More
-
2-into-1 Titanium Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins
$219.99TWO-IN-ONE EXHAUST
TITANIUM HEAT INSULATION WRAPPEDThe newest and the best technology in exhaust heat wrapping!
Titanium heat insulation took Europe by storm and now available in USA only from Demon's Cycle.
Be the first one to get this upcoming performance improvement.
Titanium heat insulating wrap is not only outperforming all other heat wraps, it also looks incredible, shiny and silky smooth.Styled after the classic Street-Rod side pipes, they must be seen and heard to be believed.
1-3/4" head pipes constructed of 16 gouge steel with 3" outlet.Created to make a statement and make it with authority. 13/4 with a show chrome finish. Unless your neighbors are bikers too, you're going to ruffle some feathers with these pipes!
Fits Harley-Davidson models
with Evolution Engine
and any Custom ApplicationMade in the USAProfessionally wrapped with:EXHAUST THERMAL WRAP
TITANIUMby DEI Design Engineering, Inc.Wrapping headers and down pipes is an important first step in controlling unwanted underhood radiant heat. Keeping exhaust gases hotter within the exhaust system helps in decreasing exhaust density and increases exhaust flow. This improves exhaust scavenging resulting in cooler air intake temperatures for an improvement in performance and a gain in horsepower.
DEI exhaust wrap is used by many pro teams in all types of racing: oval track, road course, drag, baja, super bike, off-shore, jet-ski, snowmobile, and go-cart.But it's not just for racing anymore.
Wrapping the exhaust on your motorcycle, street rod, muscle car, RV, heavy duty truck or tow vehicle can add horsepower and reduce unwanted heat in the engine and driver compartment.- Reduce under hood temperatures a realistic 50%
- Improves horsepower
- Withstands 1200F direct/2000F radiant
- Only exhaust wrap with installation guide lines
- Added durability and heat retention
- Unique carbon fiber look
Keeps exhaust heat under wraps
Protects driver/rider/passenger and mechanics from burns
Reduces underhood temperatures
For use on all internal combustion engines
2-into-1 wrapped exhaust on a Euro bobberLearn More
-
El Diablo Black 12" Rise Ape Hangers 1-1/4" Diameter Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles
$159.99"EL DIABLO" BLACK APEHANGERS
12" Rise 1-1/4" Handlebars
To fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present including. May work on throttle-by-wire models with custom fitting and any custom application.These swedged handlebars have transition from the 1-1/4" diameter to the 1" area for mounting the stock OEM style 1" handlebar controls. These bars are made with CNC bender for a smooth radius at each bend.Powdercoated black!
12" rise. 11" backward sweep.
1-1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
37" wide from tip to tip.
Come with drilled wiring holes.Black finish
Pictures curtsey of - shovel1969*64
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Black Billet Shift Rod Linkage "Tribal" for Harley Sportster Dyna
$39.99Black Anodized Billet Shifter Rod Assembly
'TRIBAL'
3-3/8"
This state of the art anodized black billet custom shifter rod.
shift rod bolts and nuts included. (heim joints are not included).
Fits Harley-Davidson Sportster and Dyna models
And Any Custom Application.
Learn More
-
18" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson
$299.99Black 18" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Apehangers
18" Rise 1-1/4" Handlebars
Powdercoated flat black!
18" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
