Black Parts
Harley-Davidson Nightster and Night Train are famous for the all black stealth look. We offer a choice of custom motorcycle parts in black for custom Harleys, choppers and bobber projects. Our handlebars, Harley wheels, engines, transmissions, starters, billet air cleaners and side mount license plates come in variety of black finishes: flat black, gloss, wrinkle, powdercoated and anodized. Some of the Harley forward controls, grips and headlights are manufactured exclusively for Demon's Cycle and available only from us.
-
El Diablo Black 18" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for Harley Motorcycles
$199.99"EL DIABLO" BLACK UNIVERSAL APEHANGERS
18" Rise 1-1/4" Handlebars
To fit Harley-Davidson FLST, FXST and any custom application.Powder coated black!
18" rise. 8" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.Flat Black
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Ultima El Bruto 107ci Evolution-Style Engine Black Finish
$4,349.99El Bruto Series 107ci 4" bore Engine
Black FinishNotice! THIS ENGINE IS IN STOCK AND WILL SHIP SAME DAY YOUR PAYMENT ARRIVES
NOT LIKE OTHERS THAT ORDER AFTER THEY HAVE YOUR MONEY
COMPLETE WITH CARB IGNITION MSO AND WARRANTY!!
FACTORY ASSEMBLED!*
*Notice: This engine is FACTORY ASSEMBLED. Some of our competitors, especially on eBay, offer engines that are self assembled from spare parts at a lower price. Do not take a risk on a non-factory assembled engine!Ultima is now offering the new " El Bruto" series engines which are designed to provide our customers with a USA built High Performance engine that was priced to be the best value of any engines now on the market. Ultima's commitment engineering excellence and competitive pricing brought El Bruto to life with a completely new design set of castings emphasizing performance, reliability, and value.
All of the castings in these Engines are poured in US foundries and are based on all new CAD designs cast from C355 Aluminum a common US Military alloy known for its stability over multiple heat cycles. The engine components are machined on state of the art CNC equipment for guaranteed dimensional accuracy and repeatability. All of our engines are dynamically balanced using proprietary methods to provide the smoothest running engines on the market and now with our new high flow cylinder heads these engines now can boast the most powerful engines on the market as well!!
We think that you will agree these engines are the best value anywhere.
True to their name, the 4" bore 107 inch El Bruto
Engines are horsepower extraordinaire. They are the most powerful EVO configuration of these sizes.
These brutes have features which insure long life and pure riding enjoyment for those who need ultimate performance.
Born In The U.S.A.Rated Power
107 C.I. / 115 HP
with 120 LB FT Torque.--------------------------------------------------------------------------------
Product Specifications/ Highlights 107 Ci
Bore: 4"
Stroke: 4.25"
Piston: Forged
Compression: 10:1
Rated Power: 115RW HP
120 LB FT Torque
Camshaft: 248 Duration .625 lift
Valve Spring: Ultima
Chrome Nose Cone / Rocker Boxes
Billet Oil Pump
Chrome Tappet Blocks
Ignition included on assembled engines
Ultima R1 CarburetorEl Bruto Series
Ultima 4" Bore 107 CI Engines & Long Blocks
Ultima is now offering the new El Bruto Series Engines which are designed to provide our customers with a U.S.A. built High Performance engine that is priced to be the best value of any engines now on the market. Midwest's commitment to engineering excellence and competitive pricing brought El Bruto to life with a completely new designed set of castings emphasizing performance, reliability, and value.
All of the castings in these engines are poured in U.S. foundries and are based on all-new CAD designs cast from C355 aluminum, a common U.S. military alloy known for its stability over multiple heat cycles. The engine components are machined on state of the art CNC equipment for guaranteed dimensional accuracy and repeatability. All of our engines are dynamically balanced using proprietary methods to provide the smoothest running engines on the market and now with our new high flow cylinder heads these engines now can boast the most powerful engines on the market as well!! We think that you will agree these engines are the best value anywhere. 12 /12 warranty. d.o.p.
Case
Made In U.S.A. Cast-in steel inserts guaranteed not to move. Large bore breather for increased crank case vacuum and less blow by. 1/2" Alignment dowels for true line bore. Counterbored stainless allen head case bolts. Close machining tolerances. Made from prime C355-T6 aluminum that is superior in strength to A356. Styling and cosmetic machining for a custom look.
Crankshaft
Forged 4140 Steel. Dynamic balanced for the smoothest running engines in the industry. Light weight 7.44" high-performance H-beam rods w/.792" fins. Jims Machining shafts and pins.
Cylinder
C355 Casting. Cast-in liners will not move. All fins are machined for an excellent cosmetic appearance.Cylinder Head
C355-T6 Casting. All fins are machined for excellent cosmetic appearance. Twin Cam Styling. 30 % More fin area than Evolution style heads for cooler running. 2.100 Stainless Int. Valves. 1.700 Stainless Ex. Valves. Manganese Bronze guides. High Silicon Wire Valve Spring with Chromoly Retainer.CarburetorUltima is proud to introduce our performance carburetors, directly interchangeable with S&S Super G Carburetors. Ultima carburetors will accept S&S jets and S&S bolt pattern air filter assemblies.Patented design improvements - a relocated accelerator pump nozzle for increased throttle response and THUNDER JETS are a bolt on! Simply remove the plugs and screw in the Thunder Jet. No expensive machining required!
Learn More
-
Black Flat Drag Bonanza V Bars Handlebars Santee by Fred Kodlin fit Harley
$49.99BLACK "BONANZA" V-Bars
To fit Harley-Davidson motorcycles and Custom Application
Santee Designer Series 'Bonanza' Handlebars by Fred KodlinThese are the latest new and improved design Bonanza Bars II from Fred Kodlin of Murdercycles. Designed for use with 96-11 style handlebar controls.Black powder coated!
29" wide.
5" backward sweep.
1"diameter."Flat" style Bonanza custom drag bars.Learn More
-
Black Wideglide Billet Front End Stock Length Dual or Single Disc for Harley Davidson 2000-Up Models
$499.99GLOSS BLACK POWDERCOATED
COMPLETE CUSTOM-STYLE FRONT END for 2000-Up Harley-Davidson
STOCK LENGTH
0 RAKEHighest quality custom front end. If you want your bike to be the best of the best - this is the one you need.
Uncompromising show look. None better.33" Overall length.
41mm forks.
Dual disc application can be used for Single disc application (caliper mount for 2000-Up Harley models).
Comes with axle.Black billet triple trees with 0 rake.
Fits most Harley-Davidson models from 1949 to present with 1" neck bearings, 7" necks, 3/4" axle.
and any custom application (caliper bracket for 2000-Up models).
Here is a comparison of caliper mount brackets for 1986-99 front ends (on the left) and new 2000-Up bracket (on the right). If you have 2000-Up brakes you no longer need an adapter!
Learn More -
Black Billet Shift Rod Linkage "Tribal" for Harley Sportster Dyna
$39.99Black Anodized Billet Shifter Rod Assembly
'TRIBAL'
3-3/8"
This state of the art anodized black billet custom shifter rod.
shift rod bolts and nuts included. (heim joints are not included).
Fits Harley-Davidson Sportster and Dyna models
And Any Custom Application.
Learn More
-
18" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson
$299.99Black 18" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Apehangers
18" Rise 1-1/4" Handlebars
Powdercoated flat black!
18" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Black Billet Custom Forward Controls with Chrome Footpegs for Harley Big Twins 70-99 COOL RIBBED
$249.00BLACK BILLET "RIBBED"
FORWARD CONTROL KITWITH CHROME FOOTPEGS AND SHIFTERSBlack billet forward control kit with fold-up ribbed chrome pegs and 3/4" Bore master cylinder.
These are bushing style forward controls
work better and smoother than bearing style controlsRear brake and shifter For Harley-Davidson Big Twin models 1970-99 (except Dyna) and Custom Choppers.Compare our price and style to tribal forward controls by Eddie Trotta, Legends, Accutronix.
Learn More -
El Bruto 120ci Evolution-Style Engine Black Finish
$4,349.99El Bruto Series 120ci 4.25" Bore Engine
Black130 HP USA Made
Notice! THIS ENGINE IS IN STOCK AND WILL SHIP SAME DAY YOUR PAYMENT ARRIVES
NOT LIKE OTHERS THAT ORDER AFTER THEY HAVE YOUR MONEY
COMPLETE WITH CARB IGNITION MSO AND WARRANTY!!
FACTORY ASSEMBLED!*
*Notice: This engine is FACTORT ASSAMBLED. Some of our competitors, especially on eBay, offer engines that are self assembled from spare parts at a lower price. Do not take a risk on a non-factory assembled engine!El Bruto Series 120ci 4.25" bore Engine
Ultima is now offering the new " El Bruto" series engines which are designed to provide our customers with a USA built High Performance engine that was priced to be the best value of any engines now on the market. Ultimas commitment engineering excellence and competitive pricing brought El Bruto to life with a completely new design set of castings emphasizing performance, reliability, and value.
All of the castings in these Engines are poured in US foundries and are based on all new CAD designs cast from C355 Aluminium a common US Military alloy known for its stability over multiple heat cycles. The engine components are machined on state of the art CNC equiptment for guaranteed dimensional accuracy and repeatability. All of our engines are dynamically balanced using propritory methods to provide the smoothest running engines on the market and now with our new high flow cylinder heads these engines now can boast the most powerful engines on the market as well!!
We think that you will agree these engines are the best value anywhere.
Product Specifications/ Highlights 120 Ci
Bore: 4.25"
Stroke: 4.25"
Piston: Mahle Forged
Compression: 9.8:1
Rated Power: 130RW Horsepower
135 LB FT Torque
Chrome Nose Cone/Rocker Boxes
Billet Oil Pump/Tappet Blocks
Mikuni 45mm HSR Series Carburetor
All fins are machined for excellent cosmetic appearance
Twin Cam Styling
30 % More fin than most Evo style heads for cooler running
Camshaft: .640" Lift
Pushrods: Crane
Valve Spring: Ultima
Billet Oil Pump
Chrome Tappet blocks Our New state of the art designed crankshaft incorporates a massive 1.670 diameter pin that is pressed into the one piece, heat treated, 4140 steel flywheel half making these crankshafts some of the strongest available on the market today. These crankshafts feature all new 7.7" long H-Beam rods with .927 diameter wrist pins to handle all the power you can throw at them. These are also balanced using our exclusive methods making these some of the smoothest engines in the industry.
Cylinder
C355-T6 Casting
Cast in heavy wall liners will not move
Liners are Centrifugly Cast with Graphite impregnated Nickle
for high durabilityAll Fins are machined for an excellent cosmetic appreance
Cylinder Head
C355-T6 Casting
All fins are machined for excellent cosmetic appearance
Twin Cam Styling means 30 % More fin than most
Evo style heads for cooler runningCompression release valves
2.100 Stainless Int Valves
1.700 Stainless Ex Valves
Manganeze Bronze guides
High Silicon WireValve Spring w/ Chromoly Retainer
Complete 120 CI Engine-- Black Finish
COMPLETE WITH CARB IGNITION, MSO AND WARRANTY!!
FACTORY ASSEMBLED!!
Learn More -
Black Wideglide Billet Front End 4" Over Stock Length Dualor Single Disc for Harley Davidson 2000-Up Models
$499.99GLOSS BLACK POWDERCOATED
COMPLETE CUSTOM-STYLE FRONT END for 2000-Up Harley-Davidson
4" OVER STOCK LENGTH
0 RAKEHighest quality custom front end. If you want your bike to be the best of the best - this is the one you need.
Uncompromising show look. None better.37" Overall length.
41mm forks.
Dual disc application can be used for Single disc application (caliper mount for 2000-Up Harley models).
Comes with axle.Black billet triple trees with 0 rake.
Fits most Harley-Davidson models from 1949 to present with 1" neck bearings, 7" necks, 3/4" axle.
and any custom application (caliper bracket for 2000-Up models).Here is a comparison of caliper mount brackets for 1986-99 front ends (on the left) and new 2000-Up bracket (on the right). If you have 2000-Up brakes you no longer need an adapter!Learn More -
Black 1-1/4" Drag Handlebars 8" Rise fit Harley-Davidson
$79.99
BLACK 8" Rise 1-1/4" T-BarsTo fit All Harley-Davidson motorcycles and Custom Application
Powdercoated BLACK!
8" rise. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
Learn More
-
Black Billet Convex Mirrors Set (Golf Tribal style) for Harley-Davidson and Metric Motorcycles
$34.99Black Billet Tribal Golf Style Mirrors
How do you make your ride stand out of scores of other custom bikes?
By using only top quality custom parts off course!
We are proud to present a set of mirrors with quality unmatched by competition. The elegant lines and powdercoated black finish just scream class!Cut above the rest. convex (objects in the mirror are closer than they appear) mirrors.
Reflective part measures 4-1/2" x 2-1/4"Do you want your bike to be the Number One? Start with these.Avoid the clunky stock mirrors on custom bikes. Low profile design gives a sleek look to handlebars. These black billet mirrors are much better than die cast mirrors offered by our competition. These mirrors would not rattle.
They Are Distortion-Free Tinted Convex Glass Mirrors.
Retail . . . . $249.99 US
These are not cheap plastic Imitations.Fit all Harley-Davidson models Softail, Fat Boy, Road King, Dyna Wide Glide, Springer, Sportster, XL, Ultra Glide Electraglide, Low Rider, V-Rod, Superglide, Electra Glide, Heritage, Street Glide, Night Train, Screaming Eagle, Texas Chopper, Big Dog, Titan, Iron Horse, Ultra and any Custom Application.Also included adopters to fit any metric motorcycles: Victory, BMW, Ducati, Honda, Kawasaki, Suzuki, Triumph, Yamaha
Learn More
-
Black Billet Smooth Front End 2" Over Harley-Davidson Stock Wide Glide
$499.99BLACK POWDERCOATED
COMPLETE CUSTOM-STYLE FRONT END
+2" OVER STOCK
0 RAKEHighest quality custom front end. If you want your bike to be the best of the best - this is the one you need.
Uncompromising show look. None better.35" Overall length.
41mm forks.
Single disk application.
Comes with axle.Custom-style black billet triple trees with 0 rake.
Fits most Harley-Davidson models from 1949 to present with 1" neck bearings, 7" necks, 3/4" axle.
and any custom application. The best way to clean up the look of your motorcycle and give it an instant custom appearance.
Custom build by Demon's CycleLearn More
