Black Parts
Harley-Davidson Nightster and Night Train are famous for the all black stealth look. We offer a choice of custom motorcycle parts in black for custom Harleys, choppers and bobber projects. Our handlebars, Harley wheels, engines, transmissions, starters, billet air cleaners and side mount license plates come in variety of black finishes: flat black, gloss, wrinkle, powdercoated and anodized. Some of the Harley forward controls, grips and headlights are manufactured exclusively for Demon's Cycle and available only from us.
-
El Diablo Black 12" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$129.00"EL DIABLO" BLACK APEHANGERS
12" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 12", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 12"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 16" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" CHROME APEHANGERS
16" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 16"
SHOW CHROME!
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 14" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" CHROME APEHANGERS
14" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 14", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 14"
SHOW CHROME!
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 12" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" CHROME APEHANGERS
12" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 12", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 12"
SHOW CHROME!
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$119.00"EL DIABLO" CHROME APEHANGERS
10" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 10"
SHOW CHROME!
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 16" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$129.00"EL DIABLO" CHROME APEHANGERS
16" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 16"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 14" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$129.00"EL DIABLO" CHROME APEHANGERS
14" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 14", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 14"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 12" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$129.00"EL DIABLO" CHROME APEHANGERS
12" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 12", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 12"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$119.00"EL DIABLO" CHROME APEHANGERS
10" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 10"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 18" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$139.00"EL DIABLO" CHROME APEHANGERS
18" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 18", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 18"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Master Cylinder and Brake Lever Black Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars
$139.00Black Smooth-Contour Master Cylinder with Brake Lever Assembly
Will fit all dual disc 1996-2010 Harley-Davidson models.
Will also fit 1984 thru 1995 Dual disc models.Will fit 2007-Up models with safety switch.
11/16" Bore master cylinder.This is top quality master cylinder.
Learn More -
Master Cylinder and Brake Lever Chrome Hand Control for 1996-10 Dual Disc Harley-Davidson Handlebars
$139.00Chrome Smooth-Contour Master Cylinder with Brake Lever Assembly
Will fit all dual disc 1996-2010 Harley-Davidson models.
Will also fit 1984 thru 1995 Dual disc models.Will fit 2007-Up models with safety switch.
11/16" Bore master cylinder.This is top quality master cylinder.
Learn More -
Frisco Chrome 9" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$99.99"Frisco" CHROME APEHANGERS
9" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 9", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 34-1/2"
- Rise: 9"
SHOW QUALITY CHROME
.jpg)
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Frisco Chrome 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$99.99"Frisco" CHROME APEHANGERS
10" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 34-1/2"
- Rise: 10"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Frisco Chrome 11" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$99.99"Frisco" CHROME APEHANGERS
11" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 11", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 11"
SHOW QUALITY CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2004-2010 Kawasaki VN2000A Vulcan
$119.00"EL DIABLO" CHROME APEHANGERS
10" Rise 1-1/4" Handlebars2004 - 2010 Kawasaki VN2000A Vulcan- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 10"
SHOW CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 12" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2004-2010 Kawasaki VN2000A Vulcan
$129.00"EL DIABLO" CHROME APEHANGERS
12" Rise 1-1/4" Handlebars2004 - 2010 Kawasaki VN2000A Vulcan- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 12", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 12"
SHOW CHROME
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2015 Suzuki VL800 Boulevard C50
$119.00"EL DIABLO" BLACK APEHANGERS
10" Rise 1-1/4" Handlebars2005 - 2015 Suzuki VL800 Boulevard C50- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 10"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 16" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" BLACK APEHANGERS
16" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 16"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 14" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" BLACK APEHANGERS
14" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 14", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 14"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 12" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$129.00"EL DIABLO" BLACK APEHANGERS
12" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 12", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 12"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 10" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2005-2009 Suzuki VL1500 Boulevard C90
$119.00"EL DIABLO" BLACK APEHANGERS
10" Rise 1-1/4" Handlebars2005-2009 Suzuki VL1500 Boulevard C90- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 10", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 10"
Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 16" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars for 2007 - 2009 Honda VT750C2 Shadow Spirit
$129.00"EL DIABLO" CHROME APEHANGERS
16" Rise 1-1/4" HandlebarsFits 2007 - 2009 Honda VT750C2 Shadow Spirit- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 16", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 16"
Chrome
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 14" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars 2007-2009 Honda VT750C2 Shadow Spirit
$129.00"EL DIABLO" CHROME APEHANGERS
14" Rise 1-1/4" HandlebarsFits 2007 - 2009 Honda VT750C2 Shadow Spirit- El Diablo ape hangers provides the bad-boy image and "old school biker" attitude but with a twist and cool look to fit your metric cruiser
- Demon's cycle specially designed and engineered the height, bends and tubing thickness to provide a cool look while improving comfort and control
- You'll find your arms are allowed to hang and drape effortlessly, and your bike's front end become easier to control
- The massive 1-1/4” tubing and the cool bad-boy biker look of these bars truly makes you a standout in the crowd
- Bar rise is 14", a height we engineered, evaluated, tested and proved was the best choice for today’s metric cruisers with riser spacing of 3-1/2" to 4" and as the best possible fit for most riders
- Each handlebar is bored and dimpled to allow for internal wiring can very easy be custom fitted on metric cruisers if riser spacing of 3-1/2" to 4"
- Requires longer control cables, but most stock 1" type controls
- Fits bikes with riser spacing of 3-1/2" to 4"
- Works with most stock and aftermarket risers
- Diameter: 1-1/4"
- Width: 37"
- Rise: 14"
Chrome
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
