Black Parts
Harley-Davidson Nightster and Night Train are famous for the all black stealth look. We offer a choice of custom motorcycle parts in black for custom Harleys, choppers and bobber projects. Our handlebars, Harley wheels, engines, transmissions, starters, billet air cleaners and side mount license plates come in variety of black finishes: flat black, gloss, wrinkle, powdercoated and anodized. Some of the Harley forward controls, grips and headlights are manufactured exclusively for Demon's Cycle and available only from us.
-
Black 1-1/4" Handlebars T-Bars with Built-In Blinkers 10" Rise with Hand Controls + Switches for Harley-Davidson
$299.99Black 10" Rise T-Bars with Built-In LED Turn Signals
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are powder coated black or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK POWDER COATED 10" Rise 1-1/4" T-Bars with Built-In L.E.D. Turn Signals
Demon's Cycle Inc. design. Available only from Demon's
Flat Black powdercoated!
10" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $499.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
499.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1344.97--
Learn More
-
Custom Black 1-1/4" Fat Drag Handlebars 6" Rise fit Harley-Davidson
$79.99
BLACK 6" Rise 1-1/4" T-BarsTo fit All Harley-Davidson motorcycles and Custom Application
Powdercoated BLACK!
6" rise. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
Learn More
-
Black Switches and Wires Harness for Harley-Davidson Hand Controls 96-06
$84.99Black Switches and Wire Harness
for Harley-DavidsonHigh quality USA made black switches for hand controls.
Wires are soldered and color-coded for easy installation.Overall length 52"
Will fit all 1996-2006 Harley-Davidson models
and Custom application.
Learn More -
5-1/2" Bobber Black Halogen H4 Headlight fits Harley-Davidson Motorcycles
$47.77Old School Classic Style Black Headlight Assembly
All metal (not plastic!) black construction.
Great for that clean custom look where a smooth shell is desired.
Includes black bottom mount bolt and mounting block.High/Low beam.5-1/2" Glass Lens.6-1/2" x 8" Overall
12V Halogen Bulb Included
Accepts standard DOT H4 bulbs
55/60WFit any Harley-Davidson model and any Custom Application.
Learn More
-
16" Black Ape Hangers 1-1/4" diameter with Hand Controls for Harley-Davidson
$299.99Black 16" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Apehangers
16" Rise 1-1/4" Handlebars
Powdercoated flat black!
16" rise. 8.5" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Custom Black 1-1/4" Drag Handlebars 4.5" Rise fit Harley-Davidson
$79.99
BLACK 4.5" Rise 1-1/4" T-BarsTo fit Harley-Davidson motorcycles and Custom Application
Powdercoated BLACK!
4.5" rise. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Machined flat spot near right side handle to accommodate for proper fitment of master cylinder.Come with oversized drilled wiring holes for any internal wiring. Pre-strung for easy internal wire installation.
Learn More -
Black 1-1/4" Drag Handlebars 7" Rise fit Harley
$79.99
BLACK 7" Rise 1-1/4" T-BarsTo fit All Harley-Davidson motorcycles and Custom Application
Powdercoated BLACK!
7" rise. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
Learn More -
2-into-1 Heat Wrapped Custom Exhaust Pipes for Harley-Davidson Big Twins
$219.99TWO-IN-ONE EXHAUST
HEAT INSULATION WRAPPEDStyled after the classic Street-Rod side pipes, they must be seen and heard to be believed.
1-3/4" head pipes constructed of 16 gauge steel with 3" outlet.Created to make a statement and make it with authority. 13/4 with a show chrome finish. Unless your neighbors are bikers too, you're going to ruffle some feathers with these pipes!
Fits Harley-Davidson models
with Evolution Engine
and any Custom ApplicationMade in the USAProfessionally wrapped with:
EXHAUST INSULATION WRAP
Graphite Black
by COOL IT ThermoTecExhaust Insulating Wrap is an innovative way to create more horsepower and reduce under-hood temperatures.
Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures. Exhaust Insulating Wrap withstands continuous heat up to 2000F, and contains no asbestos.
Thermo-Tec exhaust wrap will not over-insulate a system when properly installed due to a proprietary coating developed by Thermo-Tec - Thermal Conduction Technology (TCT) - that conducts heat across the wrap's surface. This coating controls heat build-up and dissipation.
Keeps exhaust heat under wraps
Protects driver/rider/passenger and mechanics from burnsLearn More
2-into-1 wrapped exhaust on a Euro bobber -
Black 1-1/4" Drag Handlebars 10" Rise with LED Turn Signals fit Harley-Davidson
$129.99
BLACK 10" Rise 1-1/4" T-Bars with Built-In LED Turn SignalsExclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turnsignals with internal wiring.To fit Harley-Davidson motorcycles and Custom Application
Black Powder coated!
10" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Learn More -
Black 1-1/4" Drag Handlebars 10" Rise T-Bars fit Harley-Davidson
$79.99
BLACK 10" Rise 1-1/4" T-BarsTo fit All Harley-Davidson motorcycles and Custom Application
Powdercoated BLACK!
10" rise. 6.5" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Right side has a flat spot near right side handle to accommodate for proper fitment of mastercyclinder.Come with oversized drilled wiring holes to accommodate any internal wiring. Pre-strung for easy internal wire installation.
Learn More -
MINI Electronic Tachometer with Black Interface for Harley-Davidson and Custom Motorcycles
$74.99MINI Electronic Tachometer
with Black InterfaceThis high quality mini tack measures 1-7/8" in overall diameter (1-3/4" face) and 2" long.
Custom gauge style. Polished steel.
It comes with chrome mounting clamp and wiring diagram.
Will fit any 2 cylinder 4 strokes motorcycle or a custom project.
Learn More
-
MINI Mechanical Speedometer with Black Interface M=2.1 Ratio for Harley and Custom Motorcycles
$44.991-7/8" MINI Mechanical Speedometer
with Black Interface M=2.1This high quality mini speedo measures 1-7/8" overall in diameter (1-5/8" face) and 2" long.
Clean custom style.Super compact size2240:60 Ratio
OdometerFeatures:- Illuminated face
- Polished stainless housing and bezel
- mechanical odometer
- 140mph face
- Mounting clamp
Will fit any motorcycle or a custom project.
Learn More
