Cafe Racer Style 4" Black Z-Bars 1-1/4" Drag Handlebars Metric and Sportster Models
Details
Cafe Racer Style Custom
1-1/4" 'Z-Bars'
Black Handlebars
These contemporary designs feature 1 1/4"-diameter 'fat' tubing that is one of
the hottest and newest custom bars out. Get them now to customize your bike to that one of a kind look. They have holes to accommodate the wiring on
all models from 1982 to present.
They fit the Original Equipment and after-market
risers fitted to Cafe Racer style Metric Bikes and Sportster Models
from 1974 to present and Custom Application.
34"-wide
4"-rise
3"-pullback
3 1/2" From Center to Center For Risers.
|
How to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
fabricated from 1 1/4"-inch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4. air nozzle is used to blow the lead string through the bars,Then a length of 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at their center mounting position, a stock 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings. |
You have no items to compare.
You have no items in your shopping cart.
Call us: (954) 943-0000
Mon-Fri 9:00 am - 6:00 pm EST
Sat - 9:00 am - 2:00 pm EST
