Body & Frame
-
Chrome Levers Brake Adjustable Cluch for Harley 1996-up Softail Sportster Touring Hand Controls
$24.99Custom Skull Levers Set.
Stylish aluminum chromed skull levers set.
Left and right (clutch and brake) levers included
Clutch lever is adjustable.Works on 1996-2013 Softail and Dyna models with Cable Operated Clutch
1996-2003 Sportster models, '99-'00 FXR2, FXR3, FXR4 models
1996-2007 Electra Glide, Road Glide, Road King, Street Glide, and Tour Glide models with Cable Operated Clutch
Learn More
-
Chrome Levers Brake Cluch for Harley 1996-06 Softail Sportster Touring Hand Controls
$24.99Custom Flame Levers Set.
Stylish aluminum chromed flame levers set.
Works on Harley-Davidson models 1996-2006 Softail, Dyna, Sportster, Touring etc.
Learn More
-
Chrome 1-1/4" Drag Handlebars 6" Rise with LED Turn Signals fit Harley-Davidson
$119.99
CHROME 6" Rise 1-1/4" T-Bars with Built-In LED Turn SignalsExclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn-signals with internal wiring.To fit Harley-Davidson motorcycles and Custom Application
Show chromed!
6" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Learn More
-
-
Swingarm Pivot Bearings for Harley-Davidson Softail 2000-Up Frames and Customs
$34.99Swingarm Pivot Bearings
for Harley-DavidsonFits Harley-Davidson Softail models 2000-Up and Custom Application
Manufactured from high-quality materials for all factory and aftermarket swingarms.
This auction is for 2 bearings and two retainer clips. (replaces OEM 9270A and 11158)Learn More
-
Chrome Levers with Removable Clutch Lever Anti-theft for Harley 2008-Up Hand Controls
$129.99Removable Clutch Lever Anti-theft Device Levers Set.
This stylish chrome custom levers have built-in trick that may very effectively prevent you Harley-Davidson from being stolen.
Starting with 2008 Harley's come with safety neutral switch and cannot be started without clutch being pulled. This set of levers has an easy release on the clutch lever that allows you to take the lever with you when you live your Hog unattended. Your bike will be disabled until you snap the lever back on.
To make this easy operation even more convenient, every lever set comes with a stylish leather pouch that shaped to fit the lever and has a leather belt loop and carbine.
Nobody can start your bike without the clutch lever and nobody can drive without a clutch either. that should give you a peace of mind.
Works best on Harley-Davidson models 2008-Up with safety neutral switch (by disabling the starter) but also fit Harley-Davidson models 1996-Up providing extra security (thieves cannot drive a motorcycle without clutch lever)
Learn More
-
Chrome Flat Drag Bonanza V Bars Handlebars Santee by Fred Kodlin fit Harley
$49.99CHROME "BONANZA" V-Bars
To fit Harley-Davidson motorcycles and Custom Application
Santee Designer Series 'Bonanza' Handlebars by Fred KodlinThese are the latest new and improved design Bonanza Bars II from Fred Kodlin of Murdercycles. Designed for use with 96-11 style handlebar controls.Show chromed!
29" wide.
5" backward sweep.
1"diameter."Flat" style Bonanza custom drag bars.Learn More
-
Chrome Mounting Bolts for Harley-Davidson Mirrors
$9.99Chrome Allen Bolts
Fits all Harley-Davidson models
and custom application.
For mirror installation.
Thread: 5/16"
Length: 1-1/4" (2)
1-1/2" (2)Kit comes with 4 washers.
Learn More
-
El Diablo Chrome 14" Rise Ape Hangers 1-1/4" Diameter Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles
$159.99"EL DIABLO" CHROME APEHANGERS
14" Rise 1-1/4" Handlebars
To fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present including. May work on throttle-by-wire models with custom fitting and any custom application.These swedged handlebars have transition from the 1-1/4" diameter to the 1" area for mounting the stock OEM style 1" handlebar controls. These bars are made with CNC bender for a smooth radius at each bend.Triple-plated chrome!
14" rise. 11" backward sweep.
1-1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
37" wide from tip to tip.
Come with drilled wiring holes.Chrome finish
Learn More
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Chrome 16" Rise Ape Hangers 1-1/4" Diameter Handlebars for Harley Dressers Baggers FLHT FLHTC Motorcycles
$159.99"EL DIABLO" CHROME APEHANGERS
16" Rise 1-1/4" Handlebars
To fit Harley-Davidson Touring models, Dressers, Baggers, FLHT, FLHTC from 1982 to present. May work on throttle-by-wire models with custom fitting and any custom application.These swedged handlebars have transition from the 1-1/4" diameter to the 1" area for mounting the stock OEM style 1" handlebar controls. These bars are made with CNC bender for a smooth radius at each bend.Triple-plated chrome!
16" rise. 11" backward sweep.
1-1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
37" wide from tip to tip.
Come with drilled wiring holes.Chrome finish
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
Bobber Wideglide Softail 250 Wide Rolling Chassis for Harley-Davidson Engine
$2,222.22250 WIDE TIRE
Custom Softail Rolling Chassis
Bobber Kit
with
BLACK 48 MAMMOTH SPOKE 21"x2.15" RIM with BILLET HUB
BLACK 48 MAMMOTH SPOKE 18"x8.5" RIM with BILLET HUBAll New High Line Show Quality Custom Parts
List of parts included in this kit:
"FAT DADDY"
This is not a backyard package. This is top of the line stuff!
Brand new first quality Wide Tire Softail Bobber Frame with MSO.
accepts any Harley-Davidson Evo Big Twin engine except Twin Cam 88
included rear axle and oil tank.Left Side Drive (LSD)Special Features include:
38 Degree Rake.
4 " Stretch on back bone
2 " Down tube stretchSwingarm for wide rear wheel
(250mm fat tire).
Oil tank.
Motor mount.
TIG / MIG welded at major points.
MIG welded on our new precision frame fixtures for accurate location & fitment.PrimedFrame comes with rear axle, oil tank, swingarm, pivot arm and MSO.
Frame includes a Manufacturer s Statement of Origin (MSO) for registration (will be shipped separately for safety).Accepts Harley-Davidson Evolution motor 1986-99 and any Evo-style engine up to 135": RevTech, S+S, Ultima, Merch, Patrick.$2230 Retail.
Black 48 Mammoth Spoke 18" x 8.5" Rear Wheel with Billet HubWill fit 240-250 Tire
$1099 Retail
Black 48 Mammoth Spoke 21" x 2.15" Front Wheel with Billet Hub
$899 Retail
Black Billet Custom Wideglide Front End
$1999 Retail
Black 1-1/4" Fat T-bars (drilled for internal wiring)
$210 Retail
11" Wide Custom Heavy Duty Strutless Rear Fender
$602 RetailTotal Retail:$7,039.00
plus tax.
You are getting all of the parts listed above.All our Big Twin rolling chassis will fit 84-99 Evo style H-D engine, Ultima engine, S&S engine, RevTech engine, Merch engines, Patric engines and and and all Evo styles.
You can also fit a Shovelhead engine with no problems, Twin Cam engines can easy be custom fitted with a Twin Cam adapter plate that we also offer in our listing.
Thanks, and have fun building your dream bike.
Learn More -
Rear Fender for Harley-Davidson Softail Fatboy FXST FLST models 1986-99 with Taillight and Turn Signal Mounts
$109.99Steel Rear Fender
High quality, sturdy with taillight mount.Rear fender for Harley-Davidson Evo generation Softails and Fatboys FXST, FLST models 1986-99 and any Custom Applicationwith taillight and turn signal mounts.32" tip to tip7-1/2" wideLearn More
42" over the top
