Search results for 'switches'
-
12" Black El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson
$274.99Black 12" Rise Ape Hangers
Internaly Wired with Chrome SwitchesThis listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.
Here is what you are getting:
Black Apehangers
12" Rise 1-1/4" Handlebars
Flat black!
12" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price:
210.99
206.99
Professional Installation 235.00
_________________
Total: $652.98
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
1-1/4" Handlebars "T-Bars with Built-In Blinkers 6" Rise with Hand Controls + Switches for Harley-Davidson
$299.99Chrome 6" Rise T-Bars with Built-In LED Turn Signals
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
CHROME 6" Rise 1-1/4" T-Bars with Built-In L.E.D. Turn Signals
Demon's Cycle Inc. design. Available only from Demon's
Show chromed!
6" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $499.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
499.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1344.97--
Learn More
-
Black 1-1/4" Handlebars "T-Bars" 8" Rise with Hand Controls + Switches for Harley-Davidson
$299.99BLACK 8" Rise T-Bars
with Chrome Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. Hanflebars are powder coated black. All other components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
BLACK 8" Rise 1-1/4" T-Bars
Powder coated black!
8" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More
-
El Diablo 10" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$389.99"El Diablo" Black 10" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
10" Rise 1-1/4" Handlebars
Powdercoated flat black!
10" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo 12" Black Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley-Davidson
$425.00"El Diablo" Black 12" Rise Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This "El Diablo" handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
"El Diablo" Black Apehangers
12" Rise 1-1/4" Handlebars
Powdercoated flat black!
12" rise. 8" backward sweep. 1-1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
34-1/2" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
1-1/4" Handlebars T-Bars 4.5" Rise with Hand Controls + Switches for Harley-Davidson
$299.99Low Chrome 4.5" Rise T-Bars
with Smooth-Contour Control Kit
and Chrome SwitchesThis auction is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Switch housings use Stock HD or CC custom rounded switches.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
CHROME 4.5" Rise 1-1/4" T-Bars
Show chromed!
4.5" rise. 1 1/4"-diameter center section tapers to 1" so that standard
handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
*If your motorcycle is equipped with clutch safety switch, state that with your payment and we will include the switch with your order.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99--
210.99--
206.99--
Professional Installation 235.00--
_________________
Total: $1055.97--
Learn More
-
14" Rise Frisco Chubby's Ape Hangers 1-1/4" Diameter Handlebars with Hand Controls and Switches for Harley Motorcycles
$349.99Chrome 14" Rise Frisco Chubby Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Chrome Frisco Chubby Apehangers
14" Rise 1-1/4" Handlebars
Show chromed!
14" rise. 6" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
10" Rise Black Frisco Chubby's Ape Hangers 1-1/4" Diameter Handlebars with Black Hand Controls and Switches for Harley Motorcycles
$349.99Black 10" Rise Frisco Chubby Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are pblack powder coated or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Frisco Chubby Apehangers
10" Rise 1-1/4" Handlebars
Black powder coated!
10" rise. 6" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
12" Rise Black Frisco Chubby's Handlebars Ape Hangers 1-1/4" Diameter with Hand Controls and Switches for Harley Motorcycles
$349.99Black 12" Rise Frisco Chubby Ape Hangers
with Smooth-Contour Control Kit
and Chrome SwitchesThis listing is for complete 1-1/4" handlebar set-up. All components are pblack powder coated or triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK THAN ANY HD PRODUCT.9/16" Bore master cylinder. For Single disc application(Please contact us first if you are looking for a dual disc set-up)This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Made in U.S.A.
Retail $402.99----------------------------------------------------------------
Black Frisco Chubby Apehangers
12" Rise 1-1/4" Handlebars
Black powder coated!
12" rise. 6" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
El Diablo Black 18" Rise Universal Ape Hangers 1-1/4" Diameter Handlebars With Switches for Harley Motorcycles
$274.99"EL DIABLO" BLACK UNIVERSAL APEHANGERS
18" Rise 1-1/4" Handlebars
To fit Harley-Davidson FLST, FXST and any custom application.Powder coated black!
18" rise. 8" backward sweep. 1 1/4"-diameter. Center section and tips taper to 1" so that standard handlebar controls fit.
3-1/2 on-center knurling for firm mounting.
34-1/2" wide from tip to tip.
Come with drilled wiring holes.Flat Black
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
10" Black El Diablo Ape Hangers 1-1/4" diameter Internaly Wired with Switches for Harley-Davidson
$274.99Black 10" Rise Ape Hangers
Internaly Wired with Chrome SwitchesThis listing is for 1-1/4" handlebar set-up. All components are top quality parts, featuring hidden mounting wiring and chrome switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come professionally assembled, ready to be installed on your motorcycle in minutes.
We did all the hard and tricky work so you can easily install your existing switch housings in minutes or use custom hand controls of your choice.
Here is what you are getting:
Black Apehangers
10" Rise 1-1/4" Handlebars
Flat black!
10" rise. 9" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
36" wide from tip to tip. Bars are dimpled for late control wiring.
Come with drilled wiring hols.
Retail $210.99--------------------------------------------------------------
Chrome Switches and Wire Harness
High quality USA made chrome switches for hand controls.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price:
210.99
206.99
Professional Installation 235.00
_________________
Total: $652.98
Learn MoreHow to Install New Handlebar
Ever notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4"-inch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
-
14" Rise Ape Hangers "El Diablo" Fat 1-1/4" Diameter with Hand Controls for Harley Dressers Baggers Black Switches W/ Radio Control 1996-07 Motorcycles
$655.55Chrome 14" Rise 'El Diablo' Ape Hangers
with Hand Control Kit
and Black SwitchesFor Harley-Davidson Touring (Dresser / Bagger) models W/ Radio Control from 1996 to 2007
This listing is for complete 1-1/4" fat handlebar set-up. All components are triple-plated chrome top quality parts, featuring smooth hidden mounting hand controls, hidden wiring and black switches.
All components are brand new and have been assembled by professional Harley-Davidson certified mechanic.
Official Harley-Davidson service guidebook rates the hand switches wire installation job as a 2.5 hour job, valued at $235.This handlebars come fully and professionally assembled, ready to be installed on your motorcycle in minutes.
Here is what you are getting:
Smooth-Contour Hand Controls
Unique design has hidden underside mounting
on the switch housings for
an unobstructed smooth, rounded surface on the top housing.
BETTER LOOK AND CHROME THAN ANY HD PRODUCT.11/16" Bore master cylinder. For dual disc application.
with radio controls.This is top quality kit.
Much higher quality than HD or any aftermarket product. Simply the best.
Retail $402.99----------------------------------------------------------------
Chrome 'El Diablo' Swedged Apehangers
14" Rise 1-1/4" Handlebars for Bagggers/Dressers
Show chromed!
14" rise. 11" backward sweep. 1 1/4"-diameter. Center section tapers to 1" so that standard handlebar controls fit.
37" wide from tip to tip.
Come with drilled wiring holes.
Retail $210.99--------------------------------------------------------------
Black Switches and Wire Harness
High quality black switches for Dresser hand controls with radio control.
Wires are soldered and color-coded for easy installation.
Retail $206.99---------------------------------------------------------------
Total package price: 402.99
210.99
206.99
Professional Installation 235.00
_________________
Total: $1055.97
Learn MoreEver notice how most fine artists depict the devil? They draw this demon
from hells wings as having sharp angles. This vision was not lost on
Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of
devil wings. No matter the imagery, we thought they have a real cool look, as
did Navy Seaman Mario Guerrero.- The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are
fabricated from 1 1/4-nch tubing and powder coated black.
2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed.
3. The new handlebars have oblong holes to run the control wiring in and out through.
4. air nozzle is used to blow the lead string through the bars,Then a length of
rope is attached to the string and pulled through
the bars.5. The rope was used to pull the controls wire harnesses through the bars.
6. The factory risers wer used to mount the new bars.
7. Because the bars are T inch in diameter at their center mounting position, a stock
clamp was used8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame.
9. The switch wiring exits the front of the switch housing and into the bars.
10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars
11. These stunning bars sure remind us of devil wings.
