Clearance

2 BILLET CHROME FRAME FORK CUPS

These 2 billet chrome frame fork cups will fit most
Big Twins and Custom frames
from 1960 to Present.

for 1" stem

These nice triple plated fork cups retail for $58.99 US
and we sell for a fraction of the cost.
A "must have" for any Custom Bike builder.

Learn More

16 in 1 Repair Tool Kit:
- Socket Wrench: 8/9/10 mm
- Allen Wrench: 2/2.5/3/4/5/6 mm
- Slot type screwdriver
- Phillips screwdriver
- Socket extension rod
- Flat wrench 8/10/15 mm
- Inner hexagon spanner 3/4/5/2/2.5/6 mm
- Spoke wrench

Learn More

Includes adjustable black mounting block.

2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

Great custom style and unsurpassed performance.

Fits Harley-Davidson models
Custom motorcycles and Choppers
Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.

Learn More

Includes adjustable black mounting block.

2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

Great custom style and unsurpassed performance.

Fits Harley-Davidson models
Custom motorcycles and Choppers
Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.

Learn More

Express Order Processing puts your order ahead of the line. With this option your order will be marked as a TOP PRIORITY and processed immediately after placement.

Learn More

Includes adjustable black mounting block.

2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

Great custom style and unsurpassed performance.

Fits Harley-Davidson models
Custom motorcycles and Choppers
Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.

Learn More

Chrome Billet Tri-Bar Headlamp Assembly 5-3/4" billet aluminum with a hooded rim design. 9" overall length, 6" overall width DOT approved and marked.
Fits Harley-Davidson models and any custom application even springers

Learn More

Includes adjustable black mounting block.

2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

Great custom style and unsurpassed performance.

Fits Harley-Davidson models
Custom motorcycles and Choppers
Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.

 

Learn More

Chrome Billet
Complete Chrome Tri-Bar
Headlamp Assembly

Lean, mean, clean styling in a chrome 5-3/4" headlight assembly machined from billet aluminum with a NO VISOR smooth rim design.
9" overall length
6" overall width
Includes the mounting block and 55/60W H4 halogen bulb. High/Low beam.
Billet headlights like this one retail anywhere from $199 to $450. This is your chance to buy the same for the fraction of the cost.

DOT approved and marked.

Fits Harley-Davidson models
and any custom application even springers
can also be used on Honda, Yamaha, Kawasaki, Suzuki, Victory.

Learn More

Chrome Billet
Complete Chrome Tri-Bar
Headlamp Assembly

Lean, mean, clean styling in a chrome 5-3/4" headlight assembly machined from billet aluminum with a NO VISOR smooth rim design.
9" overall length
6" overall width
Includes the mounting block and 55/60W H4 halogen bulb. High/Low beam.
Billet headlights like this one retail anywhere from $199 to $450. This is your chance to buy the same for the fraction of the cost.

DOT approved and marked.

Fits Harley-Davidson models
and any custom application even springers
can also be used on Honda, Yamaha, Kawasaki, Suzuki, Victory.

Learn More

 

How to Install New Handlebar Ever notice how most fine artists depict the devil? They draw this demon from hells wings as having sharp angles. This vision was not lost on Demons Cycles. Its new 1 1/4"-inch El Diablo handlebars sure remind us of devil wings. No matter the imagery, we thought they have a real cool look, as did Navy Seaman Mario Guerrero. The El Diablo handlebars owe their sinister look to their severe angles and gusset plates. They are fabricated from 1 1/4-nch tubing and powder coated black. 2. Our starting point, a 2007 Dyna Street-Bob: the dash, gas tank, and hand controls already have been removed. 3. The new handlebars have oblong holes to run the control wiring in and out through. 4.  air nozzle is used to blow the lead  string through the bars,Then a length of rope is attached to the string and pulled through the bars. 5. The rope was used to pull the controls wire harnesses through the bars. 6. The factory risers wer used to mount the new bars. 7. Because the bars are T inch in diameter at  their center mounting position, a stock clamp was used 8. The control switches were mounted to the bars and their harnesses fined over the top triple tree and routed into the frame. 9. The switch wiring exits the front of the switch housing and into the bars. 10. Once the switch houseing were in the place the front brake and clutch levers were attached to the bars 11. These stunning bars sure remind us of devil wings.

Learn More

"CHUBBY FRISCO" BLACK UNIVERSAL APEHANGERS 12" Rise 1-1/4" Handlebars
To fit Harley-Davidson FLST, FXST, Sportster XL, including Throttle-by-wire models, and any custom application.

Learn More

Bullet Style Chrome Headlight Assembly

Fit any Harley-Davidson and Metric model and any Custom Application.

Learn More

Learn More

BLACK 4" Rise 1-1/4" T-Bars with Built-In LED Turn Signals

 

Exclusive Demon's Cycle Inc. design gives these drag-bars unique custom look by adding sleek extra bright turn signals with internal wiring.

To fit Harley-Davidson motorcycles and Custom Application

Black Powder coated!
4" rise. 7" backward sweep. 1 1/4"-diameter center section tapers to 1" so that standard handlebar controls fit. Bars are dimpled for late control wiring.
Come with drilled wiring holes.

 

Learn More

Express Order Processing puts your order ahead of the line. With this option your order will be marked as a TOP PRIORITY and processed immediately after placement.

Learn More

BILLET ALUMINUM REAR DRIVE BELT PULLEY BLANK for Harley-Davidson 70 TOOTH 1.5" FITS BIG TWIN 1984-99 HARLEY BIG TWIN MODELS AND CUSTOM APPLICATION. This is a brand new billet aluminum pulley for custom application. Raw Aluminum. It can be polished, cut, chromed, painted or airbrushed to match your bike's paint job. Bolt pattern is not drilled, so it can be drilled for any wheel bolt pattern. 2 for 180

Product ID = 1291

Learn More

Includes adjustable black mounting block.

2 H3 style 55 Watt Halogen bulbs included. High and Low beam lights.

Two separate lights that light-up independently, have way more coverage and illumination then conventional lights.

Great custom style and unsurpassed performance.

Fits Harley-Davidson models
Custom motorcycles and Choppers
Metric bikes like: Honda, Yamaha, Kawasaki, Suzuki, Victory, BMW, Triumph etc.

 

Learn More

Chrome Billet Tri-Bar Headlamp Assembly
5-3/4" headlight assembly machined from billet aluminum with a hooded rim design. DOT approved and marked.

Learn More

Bullet Visor Style Gloss Black Headlight Assembly

Fit any Harley-Davidson model and any Custom Application.

Learn More