Fenders

Chrome Billet Fender Spacers for Wide Glide Front Ends

Use these stylish spacers to install narrow fenders on Wide Glide front ends.

1-1/8" wide
Distance between mounting holes
(eye-to-eye) 2-3/4"

Set of two spacers. Comes with mounting bolts.

Made in the USA

Chrome Slotted Fork Brace for Wide Glide Front Ends

No front fender? Want to keep it rigid? Why not eliminate front end flop while adding a touch of style to your ride!! This fork brace is intended for use on 21x2.15 front wheels with 80/90 or 90/90 front tire installed.

4-1/2" wide
2-3/4" x 5-1/2"
2-3/4" mounting holes distance (center-to-center)

Product ID = 2621

Product ID = 2622

Primed Front Fender with Chrome Tabs
for FXST, FXDWG & FXWG

Front fender for Harley-Davidson and any Custom Application

Custom Fender fits all FXST, FXSTC & Dyna Wide Glideand FXWG
perfect for custom bike

For use with 19" and 21" wheels

Product ID = 3864

Custom Front Fender
for Harley-Davidson

Front fender for Harley-Davidson and any Custom Application

Custom Fender fits all FXST, FXSTC & Dyna Wide Glideand FXWG
perfect for custom bike

For use with 21" wheels

Length: approximately 24-3/4" (from tip to tip)
Fender width: 4-1/2"

Super smooth radiused bend without steps and low-profile is the mark of this fender. Heavy-duty fender is non-drilled to permit maximum custom positioning.

Demons cycle Custom Steel Front Fender Demons Cycle Custom Steel Front Fender for Wide Glide Harley-Davidson Front Ends. 19"-21" Wheels Your search for custom Harley motorcycle parts has brought you to this front fender. The style and size you want will be based on the bike itself and many of our clients have custom paintjobs. Here are a few things you want to know as you conduct your search and why the steel front fender for wide glide front ends may be the one you want:

With all our parts we recommend having a professional do all installations. This is for your protection as well as to maintain the integrity of the bike. We guarantee the quality of all of our parts but we cannot promise proper installation unless done by a certified and trained professional mechanic. If you wish to install the front fender by yourself please feel free to check out our “Demons Cycles Front Fender Installation Video”, our just search Youtube on how to ……

Demons focuses on four things; quality, affordability, style and information. Some companies stay in business by being able to do 2 out of 4 but we refuse to settle for average. Our parts are not only custom, but our clients are as well. Whether you simply want to replace a single part or completely transform your Harley we are here to listen and offer our opinion on the advantages, disadvantages and differences of each and every single part we sell. When we say you won’t find a better deal with aren’t just talking about the price. We offer the very best information, quality and guidance for our customers. Transforming a Harley Davidson with custom parts is not an easy thing to do but we are here to walk you through every step of the way. That’s not what other companies may do but that’s what we at Demons Cycles do and that’s why we are the very best in the industry and will continue to be for over 20 years with all together like 500 years of Harley knock ledge between all employees.

Smooth Heavy Duty Chrome Rear Fender Struts
for Custom Application

Product ID = 2626

Product ID = 1972

Black Billet 21" Fender Adapters for Harley Baggers Front Ends

Use these stylish spacers to install 21" wheel fenders on Baggers front ends.

Made by Fat Baggers, Inc. (FBI)

Set of two adapters.

Made in the USA

Custom Strutless Heavy Duty
Steel Rear Fender

Custom Strutless Heavy Duty
Steel Rear Fender

Rear fender for Custom Harley-Davidson frames and
any Custom Application
11" Wide for 240-250-260 wide tires

This fender is manufactured of heavy duty steel; it has formed construction and reinforced for added strength. This fender is TIG welded and contoured to match the profile of today's wide tires. This fender won't flex and split. The steel fender has been Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere to.
For custom installations fender is raw.

Steel Rear Fender

Steel Rear Fender

Heavy Duty Custom Steel Rear Fender
16Ga smooth fender.

Rear fender for Harley-Davidson and any Custom Application
13" wide for 300mm tire.

This fender is manufactured in 16 gauge steel it has one-piece formed construction for added strength. Unlike the more usual "two halves welded together", this fender won't flex and split. The steel fender has been Phosphate etched to help to prevent corrosion and to give a good surface for primers to adhere to.

For custom installations fender is raw and not pre-drilled.

Made in USA

Product ID = 1673

Rear fender for Old School custom Harley-Davidson bobbers and any Custom Application

Made in the U.S.A.

"Gunfire" Custom Front Fender
for Harley-Davidson

29.5" long measured with soft tape across top surface

24.5" long measured tip-to-tip across

Front fender for Harley-Davidson and any Custom Application

Custom Fender fits all FXST, FXSTC & Dyna Wide Glideand FXWG
perfect for custom bike

16 gauge rear fender for custom Harley-Davidson chopper
and any Custom Application

Made in the U.S.A.

Custom Strutless Heavy Duty
Steel Rear Fender

Rear fender for Custom Harley-Davidson frames and
any Custom Application
13" Wide

For 280-300 wide tires

This fender is manufactured of heavy duty steel; it has formed construction and reinforced for added strength. This fender is TIG welded and contoured to match the profile of today's wide tires. This fender won't flex and split. The steel fender has been Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere to.
For custom installations fender is raw.

Custom Strutless Heavy Duty
Steel Rear Fender

Rear fender for Custom Harley-Davidson frames and
any Custom Application
13" Wide

For 280-300 wide tires

This fender is manufactured of heavy duty steel; it has formed construction and reinforced for added strength. This fender is TIG welded and contoured to match the profile of today's wide tires. This fender won't flex and split. The steel fender has been Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere to.
For custom installations fender is raw.

Custom Full Front Fender Fat Tire Conversion
for Harley-Davidson Dresser, Bagger, FLH Models

44" long measured with soft tape across top surface

Front fender for Harley-Davidson Dresser, Bagger, FLH models and any Custom Application.

Product ID = 447

Custom Steel Rear Fender
SABER smooth fender.

Rear fender for Harley-Davidson and any Custom Application
11" wide for 250mm tire.

This fender is manufactured in .078" steel it has one-piece formed construction for added strength. Unlike the more usual "two halves welded together", this fender won't flex and split. The steel fender has been Phosphate etched to help to prevent corrosion and to give a good surface for primers to adhere to.

For custom installations fender is raw and not pre-drilled.

Made in USA

Custom Steel Rear Fender
SABER smooth fender.

Rear fender for Harley-Davidson and any Custom Application
13" wide for 300mm tire.

This fender is manufactured in .078" steel it has one-piece formed construction for added strength. Unlike the more usual "two halves welded together", this fender won't flex and split. The steel fender has been Phosphate etched to help to prevent corrosion and to give a good surface for primers to adhere to.

For custom installations fender is raw and not pre-drilled.

Made in USA

Custom Full Front Fender
for Harley-Davidson

44" long measured with soft tape across top surface

Custom Strutless Heavy Duty
Steel Rear Fender

Rear fender for Custom Harley-Davidson frames and
any Custom Application
9" Wide for 180-200 wide tires

This fender is manufactured of heavy duty steel; it has formed construction and reinforced for added strength. This fender is TIG welded and contoured to match the profile of today's wide tires. This fender won't flex and split. The steel fender has been Phosphate etched to help prevent corrosion and to give a good surface for primers to adhere to.
For custom installations fender is raw.

16 gauge rear fender for custom Harley-Davidson chopper
and any Custom Application

A clean look without blowing the budget - the H-Bomb, 16 gauge, one piece drawn metal fender. Support bracket is included. For wide frame rigid application.

Made in the U.S.A.